EX120 Revitalizant for diesel engine

45,00 ₾

Tax included

Packaging

Quantité

Disponible

100% Original

Official Georgian Xado Representative

Designed for wear protection and restoring repair of diesel engines, including turbocharged and forced. Thanks to a 20% * greater concentration of the active substance has more margin to restore worn-out surfaces and protect them from wear and tear.

* With respect to the product HADO gel Revitalizant for diesel engines.

Description
Détail du produit

* With respect to the product HADO gel Revitalizant for diesel engines.

It forms on the surfaces of friction pairs cermet coating (engine parts restore their original geometry). As a result a renovated unit exceeds the performance new and guaranteed to serve 2-4 times longer.

Benefits

Restores and protects friction parts from wear of piston group, crank and gas distributing mechanisms
Significantly reduces fuel consumption (up to 30% idle)
Increases to the rated oil pressure in the system
Aligns and increases compression in cylinders
Increases engine power, improves acceleration capability
It reduces noise and vibration by 10 times
Increases in life span of nodes 2-3
It protects the engine from the negative effects of "cold start"
It improves engine operation in 50-100 km
It allows the engine to operate at emergency oil leakage of up to 300 km

Dosage

The volume of oil system, l.	3-10	11-20	21-30
Number of syringes (8 ml), pcs.	3	6	9
Treatment scheme	1 + 1 + 1	2 + 2 + 2	3 + 3 + 3
Number of syringes for new engines	2	4	6

The application of

Engine processing is carried out in three stages.

Stage 1: The contents of the syringe to add oil filler neck of the engine warmed up to operating temperature. Start the engine and let it idle for 5-10 minutes.

Stage 2: carried out in the same manner by 100-250 km.

Stage 3: Follow the same procedure through the 100-250 km.

The treatment is completed not less than 1500 km of run

notes

The oil is not recommended to change before the end of
Treatment can be done at idling (4 hours - the equivalent of 200 kilometers)
New engines with a mileage of up to 20 000 km in one step process
Engines after overhaul is recommended to be processed in the usual manner in three stages
The protective cermet coating is formed on any working mechanism, however, if the mechanism (engine) is in critical condition (wear 100%), it is necessary to replace the damaged parts

Capabilities

After the treatment, your car is under superzaschitoy XADO.

In the operation of the engine most subject to wear cylinder group in the area of the upper "dead" point, the details of the timing (cam follower), bearings of the crankshaft and camshaft.

Revitalizant contains a building material, which compensates for the wear of these parts.As a result of revitalization on the surfaces of friction pairs formed a new multifunction gradient coating with a set of service characteristics and stress states.

Engine parts grow in volume and return those "hundreds" and "tens", which have been lost, worn out in service. This effect repairs. The coating possesses unique properties: considerable strength, high corrosion resistance, low surface roughness. After the revitalization of the engine parts are guaranteed to serve 2-4 times longer.

As a result of the revitalization of the engine is greatly increased and leveled compression in the cylinders, fuel consumption is reduced, increased throttle response and reel car, recovered oil pumps, turbo components, shafts and bushings (bearings), the cylinder mirror is eliminated ellipse. The engine is quiet and vibration-free. Through revitalization it can always be maintained in perfect condition.