XADO Hydraulic Oils VHLP are made of the refined mineral base oils and complex of special additives. The oils contain atomic revitalizant. 
Thanks to high oil viscosity index, the oils have stable viscosity properties in a wide temperature range. XADO Hydraulic Oils VHLP have excellent demulsifying ability, perfect anti-foam properties, hydraulytic and thermal stability. The oils offer good protection against corrosion.

Owing to the content of atomic revitalizant, the oils XADO Hydraulic Oil VHLP have the following advantages compared to the regular hydraulic oils:

• compensation of current wear of joints and units of hydraulic systems and keeping them in antiwear condition;
• improvement of reliability and life span of the units of hydraulic mechanisms;
• increase of efficiency of hydraulic motors and pumps;
• decrease of power consumption of drives by up to 5
• reduction of units noise and vibration.

  Note. 
  The amount of the revitalizant in the oil is enough to keep the friction surfaces of the units in top condition. To restore and repair the mechanisms, use XADO gel-revitalizants.

  Performance level: 
  HLP DIN 51524 part 3 (VHLP) 
  ISO class L-HV (according to ISO 6743/4) 
  Vickers I-286-S and M-2950-S 
  VDMA 24318 
  FZG A/8.3/90>12 (ISO-VG 46 and 68) 
  Thyssen TH-N-256132 
  FZG A/8.3/90=12 (ISO-VG 22 and 32) 
  US Steel 126/127 
  AFNOR NF E 48603 (HV) 
  ZF-TE ML 12 
  Cincinnati Milacron

  Typical properties of XADO Hydraulic Oil VHLP:	22	32	46	68
  Density 20°C, kg/l	0,862	0,865	0,870	0,874
  Viscosity at 100 °С, mm2/s	5,1	6,5	8,4	10,9
  Viscosity at 40 °С, mm2/s	22,4	32,5	47	67
  Viscosity index	>145	>145	>145	>145
  Flash point, °С	195	213	217	230
  Pour point, °С	-41	-36	-33	-30
  Sulfated ash, wt	0,16	0,16	0,16	0,16
  Acid number, mgKOH/g	0,8	0,8	0,8	0,8