XADO Grease for constant velocity joints
23,00 ₾
Tax included
მიტანის სერვისი 3-4 დღის განმავლობაში
100% Original
Official Georgian Xado Representative
The best grease for constant velocity joints (CV joints) and loaded nodes. It contains revitalizant. Compensates current wear of parts.
The most reliable lubrication: guaranteed to protect CV joints, wheel bearings, bearings and hinges, cardan joints of transmission. Especially effective under extreme loads and high temperatures.
The best grease for constant velocity joints (CV joints) and loaded nodes. It contains revitalizant. Compensates current wear of parts.
The most reliable lubrication: guaranteed to protect CV joints, wheel bearings, bearings and hinges, cardan joints of transmission. Especially effective under extreme loads and high temperatures.
Resists pitting contact load of 7500 N and long operable at +140 o C (dropping point above +280 o C). It has excellent lubricating properties under all operating conditions, including low shear rates, dust and humidity.
Can be used in industrial and home appliance nodes (open gears, plain and roller bearings, gears, hand grinders, chains and so on. D.).
Made using a unique technology to complex integrated lithium-calcium thickener (Alassca complex). Alloyed with a special additives package. For all its properties far exceeds any grease with molybdenum disulfide (MoS 2 ).
Capabilities
- The ideal lubricant for constant velocity joints, reduces wear by 2-2.5 times
- Able for a long time to protect the CV joint from moisture and dirt when damaged protective cover (anther)
- Superuniversal grease: applied to all car units (navy bearings, ball bearings and hinges, cardan joints of transmission, bearings, pump and generator); used in industrial and home appliance nodes (open gears, bearings and roller bearings, gears, hand grinders, chain, etc.)
- Compatible with all types of automotive and industrial lithium greases mixed with them in any ratio
- It has excellent lubricating properties under all operating conditions (extremely high loads, large and small shear, high temperature, dust and humidity)
- Prevents scuffing and corrosion, reduces noise and vibration
- Thanks to the support surface of the atomic revitalizant nodes pieces in perfect condition
Benefits
- Lubrication is made by unique technology sokristallizatsionnoy; in which the special active additives synthesized in the structure of a complex thickener. This allows for a completely new and efficient approach to provide a protective lubricant properties
- Complex lithium component "transplanted" to the matrix and calcium thickener improves lubricity
- High molecular weight polymers provide increased stickiness to metal surfaces and high anti-corrosion properties of the lubricant
- Atomic revitalizant provides unique properties pritivoiznosnye
- It has advantages compared with lubricants with molybdenum disulfide.
- Contains MoS 2 . It is therefore not form solid particles on the friction surfaces, in the case of the duster SHRUS not form abrasive and corrosive acids.
specifications:
| NLGI 2 (ASTM D217) | NLGI GC-LB |
| ISO-L-XBDIB 2 (ISO 6743-9) | GOGM2N-20 (DIN 51502) |
Technical information*
| Index | Value |
|---|---|
| Color visually | light amber |
| Class NLGI consistency for | 2 |
| Penetration at +25 ° C, × 10-1 mm | 275 |
| Dropping point, ° C | above + 280 |
| Operating temperature: long, ° C briefly, ° C |
not higher than 140 is not higher than 150 |
| Tribological characteristics: Welding load, N deterioration index, mm |
more than 7500 not more than 0.75 |
* Typical values
application
- Manual application: fill the grease 1/2 of bearing volume (unit) Remove the old grease
- When using lubricating grease gun: make grease through grease fitting before it appears from the lubricated compounds gaps
- When laying lubrication constant velocity joint (CV joint.) Remove the protective cover, remove the old grease, dismantle the CV joints, disassemble it, preliminary having marked the relative positions of all the details. Rinse the parts, assemble SHRUS observing the relative positions of details according to the labeling. Completely fill with grease the inner cavity of constant velocity joints, install the protective cover and put in place SHRUS
Packaging
Tube 125 ml., Part number XA 30204
The cylinder 400 ml., Part number XA 30404
Cartridge 450 ml., Part number XA 30004
Tin 1 l., Part number XA 30504
XA 30204
მომხმარებლებმა რომლებმაც იყიდეს ეს პროდუქტი ასევე იყიდეს:
Comments (0)
No customer reviews for the moment.
The best grease for constant velocity joints (CV joints) and loaded nodes. It contains revitalizant. Compensates current wear of parts.
The most reliable lubrication: guaranteed to protect CV joints, wheel bearings, bearings and hinges, cardan joints of transmission. Especially effective under extreme loads and high temperatures.